Home › Speed Bumps, Curbs, and Asphalt Accessories
Control traffic and protect pedestrians with speed bump installation in Memphis, TN. We install asphalt speed humps, curbs, parking lot wheel stops, and other accessories. Properly placed devices slow vehicles, define drive lanes, and help keep your property safer for visitors and staff.
Precision Asphalt Memphis provides professional speed bump installation throughout Memphis, TN, Tennessee and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (901) 519-3028 or request your free quote.
Speed bump installation and asphalt accessories tailored to Memphis properties
At Precision Asphalt Memphis, we design and install speed bumps, curbs, and other asphalt accessories that actually fit how your property is used, not just what looks good on a plan. Memphis traffic patterns, summer heat, and sudden downpours all affect how speed bumps wear, how curbs handle drainage, and how long your pavement markings stay visible.
We start every speed bump installation with a site visit. We walk the drive or parking lot with you, watch the traffic flow at your busiest times when possible, and note grades, existing drainage, and pinch points where drivers tend to speed. For curbs and other asphalt features, we look at where water is standing after storms, how delivery trucks maneuver, and how pedestrians move from parking to entrances.
From there, we recommend specific bump locations, heights, and spacing that slow vehicles to the speed you want without creating suspension-rattling surprises. For curbs and wheel stops, we propose placements that protect landscaping, buildings, and utilities while still allowing easy parking and snow or debris removal. Every recommendation is tied to what we actually see on your Memphis site.
How we install speed bumps the right way
A long lasting speed bump installation starts with surface preparation. We begin by cleaning the existing asphalt or concrete with mechanical brooms and, if needed, pressure washing to remove dirt, oil, and loose material. Any cracks or potholes under the planned bump location are patched first so the bump does not settle or crack prematurely.
Next we lay out the bump with paint and chalk so you can visually confirm the placement, width, and crossing points before anything is attached. For asphalt speed humps and bumps, we heat and shape new hot mix asphalt, feathering the edges into the existing surface so there are no abrupt vertical joints that can break down or collect water.
For prefabricated rubber or plastic speed bumps, which are common in Memphis apartment communities and private lots, we drill anchor holes in the pavement using a rotary hammer and install heavy duty bolts with expansion anchors or epoxy, depending on the base material. All hardware is corrosion resistant to handle Memphis humidity and winter road treatments. We torque each fastener to spec so segments stay tight and do not rattle loose under truck traffic.
The final step is striping and signage. We apply high contrast yellow or white markings over and around the bump and can add reflective elements for night visibility. When required by code or best practice, we also install warning signs at appropriate distances so drivers have time to slow down, which reduces complaints and liability.
Curbs, wheel stops, and drainage features that protect your pavement
Curbs and related asphalt accessories do more than outline parking spaces. When correctly designed, they direct water, protect your edges, and keep vehicles where they belong. At Precision Asphalt Memphis, we install both concrete and asphalt curbs, as well as wheel stops and custom edging.
Concrete curbs are common along streets and the perimeter of parking lots. We set forms based on your site grade, use rebar or wire reinforcement where needed, and place concrete with proper slump so it holds shape without honeycombing. Control joints are cut at regular intervals to manage cracking, which is especially important in Memphis where temperature swings and underlying clay soils can cause movement.
Asphalt curbs, sometimes called extruded curbs, are useful along internal lot lanes and around landscaped islands. We install them with specialized machines that shape hot asphalt into a continuous curb that bonds directly to the asphalt surface. This option is flexible, easier to modify later, and ideal when you anticipate layout changes.
Wheel stops (parking bumpers) are placed and anchored to keep vehicles from striking buildings, walls, and sidewalks. We space and align them to local standards, allowing enough room for bumpers and trailer hitches. Where drainage is a concern, we design gaps or contouring so wheel stops and curbs do not trap water, which can quickly damage Memphis pavements that already fight moisture and heat.
Materials, design options, and what affects your cost
Customers often ask why two speed bump installation quotes can be so different. The main cost drivers are materials, scope, site condition, and traffic load.
Materials: Asphalt speed humps are usually more permanent and better for heavy truck traffic, but they require more surface preparation and paving labor. Prefabricated rubber or plastic bumps have lower upfront disturbance and can be removed or relocated later, but the material cost per foot is often higher. Curbs can be formed concrete, extruded asphalt, or modular blocks, each with different price points and lifespans.
Scope and layout: The number of bumps, total linear feet of curbing, quantity of wheel stops, and how much striping and signage you need all factor in. A typical Memphis apartment lot might include three to five bumps, several islands of extruded curbing, and a full set of wheel stops. A small church or daycare might only need one or two bumps and a few curbed areas.
Site condition: If your lot already has extensive cracking, standing water, or base failures, we may recommend repairs before we anchor anything. Installing new features on failing pavement usually costs more in the long run. Extra work like saw cutting, base patching, and drainage adjustments will affect the final price.
Traffic and use: Locations with frequent delivery trucks, garbage trucks, or transit buses need heavier duty designs, wider humps, and stronger anchoring. Light duty lots that serve mostly cars can use less aggressive options. We walk you through these tradeoffs so you understand why a particular solution is recommended for your Memphis property rather than a one size fits all approach.
Common Memphis issues and how Precision Asphalt Memphis prevents them
Our local crews see the same avoidable problems around Memphis again and again: speed bumps that are too tall or too short, curbs that trap water, and wheel stops that wander out of line. We design and install to avoid these headaches from day one.
Improper bump height: Overly tall bumps cause bottoming out, especially for delivery vans and low clearance cars, which leads to complaints and sometimes removal. We follow industry guidelines for height and length and test with typical vehicle types on your site when needed. Our goal is predictable slowing, not damage.
Poor drainage around curbs: If a curb blocks water flow, puddles form at its ends, which accelerates pavement failure and becomes a slip hazard. Before we set curbs, we check existing grades and may saw cut small drainage breaks or adjust heights so water can find a controlled path to an inlet or swale.
Loose or broken accessories: Wheel stops and rubber bumps installed with undersized anchors or into crumbling asphalt will move quickly. We inspect the substrate, repair it where needed, and use hardware matched to the pavement thickness. On high traffic properties, we often schedule periodic inspections so we can tighten or replace anchors before anything becomes a nuisance or hazard.
Visibility and compliance: Faded paint or missing signs reduce the effectiveness of your speed control devices and increase your liability risk. We use quality striping paints and reflective beads where appropriate, and we can set up a maintenance schedule so markings stay bright despite Memphis sun and rainfall.
What to expect when you choose Precision Asphalt Memphis
Working with Precision Asphalt Memphis is straightforward. After your initial call, we schedule a site visit, typically within a few business days. We listen to your concerns, measure critical areas, review any city or HOA requirements, and discuss your budget. Most proposals for speed bump installation, curbs, and accessories are turned around quickly, and we are clear about what is included.
Once approved, we coordinate timing so we disrupt your operations as little as possible. For busy Memphis shopping centers and medical offices, we often work early mornings, evenings, or weekends. We set up cones, barricades, and clear signage to redirect traffic around our work zones and keep customers, tenants, and staff safe.
During installation, a project lead is on site to answer questions and make small layout adjustments if needed. After the work is complete, we walk the property with you, confirm the locations and finishes, and explain any curing or usage guidelines. For example, asphalt curbs and humps can usually handle light traffic quickly, but striping and markings may need a short curing period for best durability.
We keep records of what was installed, including product types and layout sketches. This makes future additions, adjustments, or repairs faster and more accurate if your needs change as your Memphis property evolves.
